ClimateRight CR-2550 Instrukcja Właściciela Pobierz pdf (Strona 98)

Systems

4-5

WARNING

GASOLINE VAPORS CAN EXPLODE. BEFORE STARTING

ENGINE, OPERATE BLOWER 4 MINUTES AND CHECK

ENGINE COMPARTMENT FOR GASOLINE LEAKS OR

VAPORS. RUN BLOWER BELOW CRUSING SPEED.

Horn

This switch controls the audible horn signal. Your vessel features an

electric horn. It is located at the starboard forward hull. It is protected

by a stainless grille cover. Be sure to test the horn before each outing

and learn horn and bridge signals.

Bilge Blower

This switch controls the bilge ventilation blower. The blower’s

function is to evaculate any fumes and engine exhaust gases that have

accumulated in the lower bilge. The blower must be activated at least 4

minutes prior to starting the engine. Check the ventilation ducts and black

bilge hose to ensure they are not obstructed. Be careful not to step

on the bilge hoses when doing bilge maintenance. The blower shall be

used below cruising speeds.

Nav/Anc

This switch controls the running and stern lights. It is a two position

switch. Activate the forward section and the running lights (navigation

and stern lights) are activated along with the instrumentation and

switch lights for night running. Activate the aft portion and the stern

light (360 degree light) is activated. Remember the navigation lights,

sometimes called running lights must be used between sunset and

sunrise. Should you anchor or stop the vessel at night the 360 degree

light is required to be lit.