ClimateRight CR-2550 Instrukcja Właściciela Pobierz pdf (Strona 238)

Equipment Operation

6-95

VACUUM FLUSH SYSTEM

The Vacuﬂ ush® head uses a combination of vacuum suction and wa-

ter ﬂ ow from the fresh water tank to clear the head of waste. Before

using the Vacuﬂ ush system turn the head switch located in the head

to the “on” position at the main DC control panel.

Make sure that there is always a small amount of water left in the toi-

let head bowl. This acts as a trap and will reduce unwanted odors.

Before leaving the boat for an extended period, ﬂ ush the head for at

least 10 seconds. This ensures that waste has cleared the sanitation

transfer hose and has entered the holding tank.

Waste left within the transfer hose tends to dry out and harden. This

could restrict the internal size of the hose and hamper future opera-

tion. The system components including the hose are formulated for

the transfer of sanitary waste only. Do not allow the following items

in the system: Strong acid or caustics such as drain openers, petro-

leum solvents or fuels, alcohol based products such as antifreeze and

pine oil products along with sanitary napkins and baby diapers.

System vacuum is monitored by a switch located on the outside of

the vacuum generator’s tank. When the switch senses a vacuum drop,

it automatically signals the pump to energize and bring the vacuum

back to the operating level. This is normally a two minute process.