ClimateRight CR-2550 Instrukcja Właściciela Strona 289

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 288
7-44
CHAPTER 7
Checking Engine Coolant
WARNING
!
AVOID BODILY INJURY!
ALLOW ENGINE TO COOL DOWN BEFORE REMOVING
THE COOLANT PRESSURE CAP. A SUDDEN LOSS OF
PRESSURE COULD CAUSE HOT COOLANT TO BOIL
AND DISCHARGE VIOLENTLY. AFTER THE ENGINE
HAS COOLED, TURN THE CAP 1/4 TURN TO ALLOW
PRESSURE TO ESCAPE SLOWLY, THEN PUSH DOWN
AND TURN THE CAP COMPLETELY OFF.
1. Remove the cap from the heat exchanger and observe the level of
the uid.
2. The coolant level in the heat exchanger should be at the bottom
of the ller neck. A low coolant level means you should contact your
Regal dealer.
3.Install the cap onto the heat exchanger.
4. When reinstalling the pressure cap, be sure to tighten it until it seats
on the ller neck.
5. With the engine at normal operating temperature, check the coolant
level in the coolant recovery canister.
a=Coolant Cap
7-44
CHAPTER 7
Checking Engine Coolant
WARNING
!
AVOID BODILY INJURY!
ALLOW ENGINE TO COOL DOWN BEFORE REMOVING
THE COOLANT PRESSURE CAP. A SUDDEN LOSS OF
PRESSURE COULD CAUSE HOT COOLANT TO BOIL
AND DISCHARGE VIOLENTLY. AFTER THE ENGINE
HAS COOLED, TURN THE CAP 1/4 TURN TO ALLOW
PRESSURE TO ESCAPE SLOWLY, THEN PUSH DOWN
AND TURN THE CAP COMPLETELY OFF.
1. Remove the cap from the heat exchanger and observe the level of
the uid.
2. The coolant level in the heat exchanger should be at the bottom
of the ller neck. A low coolant level means you should contact your
Regal dealer.
3.Install the cap onto the heat exchanger.
4. When reinstalling the pressure cap, be sure to tighten it until it seats
on the ller neck.
5. With the engine at normal operating temperature, check the coolant
level in the coolant recovery canister.
a=Coolant Cap
Przeglądanie stron 288
1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 348 349

Komentarze do niniejszej Instrukcji

Brak uwag